lowering the rear suspension

after talking to Stevie i thought i'd post up some of the smaller/cheaper mods i've done. The 1st came about after the coil-over kit i fitted just didn't lower the rear-end enough, i have had a few "what the f**k?" comments after i've told them, but it works


the spacers were made from old worktop & MDF, & the standard mount turned upside down. This means you have to compress the suspension to attached the shock, which then holds the suspension at that height. WARNINING remember to re-compress the suspension before undoing the shock mounts, i forgot & got attacked by a nut flying around in the boot lol

i will confess i have ordered these mounts now which do exactly the same thing

Nice am liking them duane good little mod that