lowering the rear suspension
Page 1 of 1 • Share •
lowering the rear suspension
after talking to Stevie i thought i'd post up some of the smaller/cheaper mods i've done. The 1st came about after the coil-over kit i fitted just didn't lower the rear-end enough, i have had a few "what the f**k?" comments after i've told them, but it works

the spacers were made from old worktop & MDF, & the standard mount turned upside down. This means you have to compress the suspension to attached the shock, which then holds the suspension at that height. WARNINING remember to re-compress the suspension before undoing the shock mounts, i forgot & got attacked by a nut flying around in the boot lol
i will confess i have ordered these mounts now which do exactly the same thing


the spacers were made from old worktop & MDF, & the standard mount turned upside down. This means you have to compress the suspension to attached the shock, which then holds the suspension at that height. WARNINING remember to re-compress the suspension before undoing the shock mounts, i forgot & got attacked by a nut flying around in the boot lol
i will confess i have ordered these mounts now which do exactly the same thing

_________________

p fandango- Posts : 283
Join date : 2012-05-16
Re: lowering the rear suspension
Nice am liking them duane good little mod that 

_________________
855R manual in olive green baby ooooh yeahhhhhh
CONRODS!!- Posts : 262
Join date : 2012-05-15
Age : 40
Location : kent
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum